Aigeni Technology Co.,Ltd
Product Categories
Exhibition
Home > Exhibition > Content

Correct installation and maintenance of pedal powered electric bike battery

Aigeni Technology Co.,Ltd | Updated: Feb 01, 2019
Source:

The pedal powered electric bike battery must be correctly installed, and the line and the line cannot be crossed; the battery bead cannot be directly pressed on the electric wire or the battery contact. Now each group of batteries is equipped with rubber parts. When fixing, please put the rubber first. The piece is attached to each battery, and then the iron pressure bar is pressed on the rubber piece; the contact fixing screw of the battery connection must be fastened in place; after the battery is pressed, it must not be shaken in the battery case, and the battery compartment must be used in the spare place. Or cardboard or foam plugs.

 

Moreover, during the use of the pedal-powered electric bicycle, it is necessary to carry out reasonable maintenance and maintenance of the battery. For example, to keep the battery fully charged, the battery should be replenished every day, so that the battery is in a "full" state for a long time and after use. Charge, the new car does not need to be used up and recharged for the first time.

 

The pedal powered electric bike battery is recommended to use a deep discharge after two months, that is, long distance riding until the undervoltage indicator flashes, the battery runs out, and then the battery is restored by charging. Reduce the discharge time of large currents, extend battery life and increase mileage.

 

It is normal for the battery capacity of the pedal electric bicycle in winter to decrease with the temperature drop. When the temperature rises, its function naturally recovers. Keep the surface of the battery clean for a long time, and prohibit exposure during storage. Store the car in a cool, ventilated and dry place. When it is hot in summer, the charging should be in a cool and ventilated place. It is best to charge for 2-3 hours and recharge after 1 hour. When the temperature is low in winter, try to charge indoors.

 

http://www.aigeniebike.com/


Contact Us
Aigeni Technology Co.,Ltd
Address: Donggang Industrial Park, Xishan District, Wuxi City, Jiangsu Province
Tel: +86-510-88602183  Fax: +86-510-88760155
E-mail: sales@aigeni.com
Copyright © Aigeni Technology Co.,Ltd